Wholesale Parking Systems Financing

gate operators - gate openers

access control payment systems
get a quote

Home » Access Control » Telephone Entry

 Checkout
Manufacturer: Select Engineered Systems SES
Select Engineered Systems Basic Telephone Entry with LCD Display Model SES TEC1CA (2 Line Display)
Select Engineered Systems Basic Telephone Entry with LCD Display Model SES TEC1CA (2 Line Display)

Description

Select Engineered Systems Telephone Entry System Model SES TEC1CA (2 Line Display). The TEC1CA model includes a clock, a calendar, a modem, and software. Capacity for optional card-capable system matches memory size of Unit capacity.

The TEC1 series provides Basic Telephone Entry with 2 line (TEC1) or 4 line (TEC1M) displays and five capacities: 50, 125, 250, 500 and 995 which you can choose below to match your requirements. The CA models have card access capability and include the modem and basic software. All systems come with 2 relays standard and the LCD directory display is easily read in direct sunlight or at night. As with all SES telephone access systems, the TEC1 series has board level surge suppression at no additional cost, and the stainless steel front door and aluminum back box are sure to provide years of durable service. Designed to the same high standards as the TEC and CAT product lines, the TEC1s comes with a two year limited warranty. The best of basic telephone entry, with unmatched SES quality.

TEC1 Series Standard Features:

  • Two line (TEC1) or four line (TEC1M) LCD display readable in direct sunlight or darkness.
  • System programmable code length from 1 to 6 digits for codes and PINs.
  • Programmable Entry PIN code attempts (strike out) from 0 to 9 tries.
  • Programmable Hide-a-Name feature to conceal resident identities.
  • Provides two door control relays.
  • Ability to latch relay or provide remote door release through telephone touch tones.
  • REX inputs for both entrance control relays.
  • Dials out up to 14 digit telephone numbers tone or rotary.
  • Talk time programmable from 1- 99 minutes.
  • Programmable voice mail response via active keypad.
  • Mutes tones in speaker while dialing.
  • Blocks door open tone through microphone.
  • Fully programmable through the keypad.
  • Non-volatile memory.
  • Programmable background beep to indicate incoming call is from TEC1.
  • Integrated surge protection on all inputs and outputs to minimize transient voltage effects.
  • Postal lock capability included.
  • Surface semi flush or pedestal mounting.
  • Manager Password.
  • Battery charging circuit.
  • 2 year limited warranty.

TEC1 Series Standard Specifications:

  • Outside dimensions: 8 1/2 W x 113/4 H x 3 1/2 D
  • Power: 16.5VAC 20VA transformer (supplied).
  • Construction: stainless steel front door, with aluminum back box.
  • Operating environment: Temperature: 0 to +158 F Relative humidity: 5% to 95% non-condensing
  • Memory type: non-volatile
  • Relay type: Form A or B dry contact rated 24 V @ 3 AMPS.
  • Tone detection: crystal controlled, will detect short burst 50 ms tone.


Select Engineered Systems Basic Telephone Entry with LCD Display Model TEC1CA Manuals:

Select Engineered Systems Basic Telephone Entry with LCD Display Model TEC1CA Installer Manual

Select Engineered Systems Basic Telephone Entry with LCD Display Model TEC1CA A&E Specification Manual

Select Engineered Systems Basic Telephone Entry with LCD Display Model TEC1CA Product Sheet

Choose below your desire capacity and product options...

 
Choose your SES TEC1CA Model by Capacity: T1HF50CA (Capacity 50)
T1HF125CA (Capacity 125) (+$214.00)
T1HF250CA (Capacity 250) (+$326.00)
T1HF500CA (Capacity 500) (+$438.00)
T1HF995CA (Capacity 995) (+$550.00)
SES 42" Pedestal Kit (kit includes one SES 42" pedestal #PST242 and one SES adapter #PSTATAC) No, don't add a SES 42" Pedestal Kit
Add a SES 42" Pedestal Kit (+$313.00)
Add SES Modem 56K Baud OPTKMODEM56K (used for basic programming of TEC units over phone line) No, don't add a SES Modem 56K Baud
Add a SES Modem 56K Baud (+$218.00)
Add SES Network Interface Card OPTNIC2 (requires a network administrator to install software/IP address) No, don't add a SES Network Interface Card
Add a SES Network Interface Card (+$230.00)
Add SES Multi-unit Interface OPTKMUI (allows up to 8 units to share a single telephone line. NOTE: ONE REQUIRED FOR EACH UNIT PLACED ON A SINGLE LINE) No, don't add a SES Multi-unit Interface
Add a SES Multi-unit Interface (+$95.00)
Add SES CCD Camera, color OPTMINICOLORCAM No, don't add a SES CCD Camera, color OPTMINICOLORCAM
Add a SES CCD Camera, color OPTMINICOLORCAM (+$342.00)
Add SES Weather Hood WHT1 No, don't add a SES Weather Hood
Add a SES Weather Hood (+$156.00)
Add SES Weather Hood Lighted WHLT1 No, don't add a SES Weather Hood Lighted
Add a SES Weather Hood Lighted (+$243.00)
Add SES Card Access Module OPTKC2000 (2000 Cards) No, don't add a Card Access Module OPTKC2000
Add a SES Card Access Module OPTKC2000 (+$364.00)
Price: $1,035.00

 
« Previous | Next »

manufacturers Linear Liftmaster Securakey Chamberlain Liftmaster DoorKing Nice Elite Eagle GTO Apollo Multicode Hy Security Liftmaster Magnetic Autocontrol AWID Miller Edge