POSSIBLE REPLACEMENT TO USE
THIS MODEL LINEAR-AK-11
Linear AK-21W Weather Resistant Digital Keypad
Linear AK-21W is supplied with four different plastic snap-on Model AK-21W is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white, ivory & bronze bezels are packaged separately.
Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. The anti-passback feature prevents using the same code again before the programmed time elapses.
All system indicators and lights are long-lasting, solid-state LEDs. Two indicators show the status of the entry system. The left indicator lights red to indicate power, then turns green when access is granted. The right indicator lights yellow when the keypad is in lockout condition (from too many incorrect code entries). The keypad's courtesy light dimly illuminates the keys at all times. The courtesy light brightly illuminates the keys for two minutes after any key is pressed. An internal sounder beeps when each key is pressed. An internal jumper sets the sounder volume high or low.
-Designed for outdoor applications
-Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities
-Mounts in a single gang electrical box using security screws; tool included
-Four independent outputs and timers: two form C relays and two solid-state open collector outputs
-Up to 480 programmable input codes of one to six digits each for activating either or both relays
-Two LED indicators show system status
-Key operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockout
-Rugged metal keys
-Built-in LED downlights
-Tactile and audible feedback
-Includes 4 interchangeable decorative bezels
-3" W x 5" H x 3" D
-Voltage: 12-24 Vac or Vdc (ac supply must be isolated); power can be from access device or separate supply
-Outputs: Relay #1, Form C 5 Amps @ 28 Volts maximum; Relay #2 (Auxiliary), Form C 1 Amp @ 28 Volts maximum; solid-state outputs (Outputs #3 and #4), short-to-common 100 mA @ 30 Vdc maximum
-Inputs: a. Open Request: terminal input activates the programmed control relay b. Door Sense/Inhibit: monitors status of a protected door or can be programmed to restrict access to relay 1 c.Keypad: -for programming and PIN code entry
-Display: two LEDs for system activity and program data
-Sounder: programmable activation from key presses or output
-Temperature: -22F to +149F (-30C to +65C)Humidity: 5% to 95% non-condensing.
-Quantity discounts available.
ak 2w ak2w