Wholesale Parking Systems Financing

gate operators - gate openers

access control payment systems
get a quote

Home » Gate Operators - Gate Openers » Swing Gate Operators

 Checkout
Manufacturer: GTO
GTO PRO SW4000XL Residential / Light Commercial Duty Swing Gate Operator Kit with HBP4XL Hardware Bracket For Gate Up To 20' And 1000 lbs.
GTO PRO SW4000XL Residential / Light Commercial Duty Swing Gate Operator Kit with HBP4XL Hardware Bracket For Gate Up To 20' And 1000 lbs.

GTO PRO SW4000XL Residential / Light Commercial Duty Swing Gate Operator Kit with HBP4XL Hardware Bracket For Gate Up To 20' And 1000 lbs.



This Model Is Discontinued. Please see GTO PRO SW 4000XLS Swing Gate Operator as a possible replacement.

GTO PRO SW4000XL Swing Gate Operator Kit is designed for tubular steel, vinyl, wood, or ornamental gates. The PRO4000XL is for single swing gates. New enhanced motor for faster open/close. This kit includes the HBP4XL Hardware Bracket which contains the UPGRADED hardware and brackets that are required for the PRO-SW4000XL kit to open and close a gate that is up to 1000 lbs. & 20 feet. Add the slave unit PRO4200XL for a double swing gate with the HBP4XL bracket (below).

The 4000XL has an enhanced motor that provides more power than the previous model. This feature provides a faster open/close speed from as low as 18 seconds. This system is capable of addressing single family residences or multi-family complexes of up to 20 families, and similar light commercial applications. A major improvement with no price increase over the previous model.

This system may qualify for the GTO Solar Tax Credit when purchased with a GTO solar panel. Click here to learn more.

GTO SW4000XL Manual

GTO SW4000XL Specs

Includes:

  • Operator arm
  • AC transformer
  • 12 volt battery
  • Control box/control board
  • Receiver with 10 ft. cable
  • HBP4XL Hardware Bracket
  • Entry transmitter
  • 6 ft. power cable
  • Mounting hardware
  • Installation/safety manual
  • Caution signs.
  • Warning Beeper
  • Adjustable obstacle-reversing safety feature
Features:
  • 12 volt system, no electrician needed for installation
  • Gate will work during electrical power outage
  • Quick and easy installation, with user friendly instructions
  • Solar Panel Charger available for remote locations
  • Will operate a gate up to 16' long and weighing up to 650 lbs. each leaf if all proper installation procedures are followed. Note: Ball bearing hinges should be used on all gates weighing over 250 lbs (113.4kg).
  • Control box can be mounted in protected area away from receiver (may require longer cables)
  • Receiver unit with antenna and 10' cable can be placed in best location for reception of signal
  • Can be operated by remote transmitter, digital keypad, push button or combination
  • Full systems capable "add on ready" heavy-duty control board includes adjustable obstruction sensing, gate sequencing and auto close settings (0-120 seconds)
  • High cycle capability with true soft start and stop operation
  • Full access ready package includes battery, radio receiver, entry transmitter, AC transformer, and all necessary mounting hardware for a standard installation
  • Can operate as 'push to open' or 'pull to open' (specify when ordering - extra hardware required for push to open)
  • UL rated for Class I, II, III & IV. System certified to be in compliance with UL 325, 5th edition
  • Two-year limited warranty applies to replacing parts from GTO, Inc.

Specifications

Drive

  • Powered by resilient 12 volt motor, 16:1 planetary gear drive system
  • Temperature rating of motor: -5F (-28C) to +160F (+71C)
  • Opening time is around 18-25 seconds, depending on the size and weight of the gate
  • Range of arm stroke is up to 22" (56 cm), with arm fully retracted is 46.25" (118 cm), mounting point to mounting point
Power
  • The PRO-SW4000XL system is powered by a 12 volt DC/7.0 amp hour, sealed, rechargeable battery (included)
  • Optional second battery fits in control box, used for solar applications or high traffic applications, if needed
  • Battery charge maintained by a 120V AC/60 Hz input and 18 VAC at 40 mA; NOTE: Transformer should never be connected directly to any battery
Controls
  • The GTO control board can be programmed for pull-to-open or push-to-open
  • Slow Start/Stop for added cycles and system life
  • Auto-memorization of digital transmitter code
  • Charging regulated circuit on control board. "Sleep draw" is 15 mA; "Active draw" is 5 to 9 amps
  • GTO remote-mounted RF receiver tuned at 318 MHz
 
Convert to Dual Gate System No, I don't need a second arm for a dual gate system
Yes, I have a dual gate, please add GTO PRO SW4200XLS Slave Swing Gate Operator with an additional HBP4XL Hardware Bracket (+$728.00)
Price: $958.00
Out of Stock

 
« Previous | Next »

manufacturers Linear Liftmaster Securakey Chamberlain Liftmaster DoorKing Nice Elite Eagle GTO Apollo Multicode Hy Security Liftmaster Magnetic Autocontrol AWID Miller Edge