DoorKing 6300-081 (Slave) Residential / Commercial Dual Swing Gate Operator
The Doorking 6300-081 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications.
A mounting kit is required for this gate operator. You must add a post or pad mount kit to compete the order for this product.
The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.
DoorKing 6300 Manual
-Self-adjusting, no maintenance magnetic limits.
-Overlap feature for dual swing gate operation.
-Designed with a built-in primary and secondary entrapment prevention system.
-Ports for plug-in loop detectors.
-Two convenience outlets.
-Tamper detect circuit.
-DC Powered convenience open (optional).
-Gate tracker reporting output.
-Built-in reset switch.
-Built-in power On/Off switch.
-Model 6300 with 1/2 HP Motor
-Maximum gate width 18-feet.
-Maximum gate weight 700 pounds
-Swings gate 90 degrees in approximately 15-seconds.
-1/2 HP continuous-duty motor.
-115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
-Class I, II, III and IV applications.
-Compliant with UL 325 and 991.
-Dimensions (operator only): 13.25"W x 12"H* x 28"D
OPTIONS AVAILABLE WITH THIS OPERATOR
-Master / slave connection cable (slave operator is shipped with 50-feet of cable).
-Post or pad mount - specify which.
-DC powered convenience open.
-Plug-in loop detectors.
-Heater kit for cold environments.
door-king door king 630081 6300 81